Meaning
Geometric calculation used to estimate the volume of liquid remaining in a tilted tank when the liquid does not cover the entire bottom surface. The wedge formula applies when a vessel such as a barge or a tanker sits at an angle. It allows for the calculation of the small volume of product left in the lowest point of the tank, and it ceases to be used once the liquid level covers the entire floor.
Partial Volume
Conventional gauging methods fail when the liquid level does not touch the striking plate at the measurement point. The wedge formula uses the angle of the tilt and the dimensions of the tank to project the shape of the liquid pool. This ensures that every drop of remaining cargo is accounted for during the final discharge survey.
Geometric Logic
Calculation of this volume requires the liquid depth and the vessel trim. The wedge formula converts these linear measurements into a volumetric value that represents the contents of the partial wedge. It is a standard tool for independent inspectors during the remaining on board assessment.
By using this mathematical approach, the inspector can provide a defensible figure for the amount of unpumpable cargo, which is then subtracted from the total loaded volume to determine the actual delivery efficiency of the vessel.
Residual Calculation
Accurate reporting of these small amounts is necessary to determine the total outturn of a voyage. The wedge formula prevents the carrier from being unfairly penalized for product that is physically present although difficult to measure with a standard sounding tape. It provides a mathematically sound basis for settling the final account between the shipper and the receiver.