Meaning
Material failure occurs when a component is subjected to repeated loading and unloading cycles well below its ultimate tensile strength. Engineering models for cyclic fatigue predict the point at which microscopic cracks initiate and grow through a metal structure. The process continues until the remaining cross section cannot support the applied load, leading to sudden fracture.
Designers use S-N curves to determine the allowable number of repetitions for a given stress range. The limit of this progression is the endurance limit, below which the material theoretically lasts indefinitely.
Material Failure
Repeated stress variations in subsea equipment are caused by ocean waves and internal pressure fluctuations. While a single load might be harmless, the cumulative effect of cyclic fatigue creates a permanent record of damage within the molecular structure. Manufacturers must prove their components withstand millions of these cycles to qualify for deployment in high pressure environments.
Stress Interval
Prediction of service life depends on the accurate measurement of peak and valley stresses. The intensity of cyclic fatigue increases exponentially as the amplitude of the stress cycle grows. Small design changes that reduce stress concentrations at welds or corners greatly improve the longevity of the part.
Warranty Risk
Service agreements for industrial pumps and valves typically exclude damage caused by operation outside specified vibration limits. Because cyclic fatigue is a cumulative process, intermittent exceeding of these limits voids the manufacturer performance guarantee. Tracking the total number of cycles helps operators schedule preemptive replacements before a catastrophic break occurs.